Олива трансмісійна Hipol GL-5 80W-90
Quality
class: API: GL-5
Viscosity
grad: SAE: 80W-90
General features
Vehicle
gear mineral oil with very good lubricating, antioxidative, anticorrosive and
antifoaming properties.
Application
Mineral
oil intended to lubricate gears of vehicles operating in very difficult
conditions, especially for gearboxes and final drives, where API GL-5 oil is
recommended, it is featured by perfect properties guaranteeing maximal
protection against mechanical wear out.
Standards, approvals,
specifications
Approval
for use in the side gear shaft and the housing track frames in the heavy
equipment of Huta Stalowa Wola (HSW)
Physical and chemical properties
|
Parameters |
Unit |
Typical values |
|
Quality class according to SAE J
306-OCT 91 |
- |
80W-90 |
|
Kinematic viscosity at 100°C |
mm2/s |
14.5 |
|
Viscosity index |
- |
99 |
|
Flow temperature |
0C |
-30 |
|
Solidification point |
0C |
- |
|
Ignition temperature |
0C |
220 |
|
Resistance to foaming: · foam volume
after 5 min. of air blowing at 25°C/95°C/25°C following the test at 95°C ·
foam volume after 10 min. standing still at 25°C/95°C/25°C following the test
at 95°C |
ml |
10/20/10 0/0/0 |
|
Corrosiveness to copper 3 h/120°C,
corrosion rate |
reference sample |
2b |
|
Lubricating properties on a four ball
pressure tester: · weld load, · loaded wear ratio |
kG |
400 56 |
ATTENTION: Physicochemical parameters listed in the table
are typical values. Real values are stated in quality control certificates
attached to each product lot.