Олива гідравлічна Hydrol L-HM/HLP 100
Quality
class: Quality class according to ISO
11158 – HM
Viscosity
grad: ISO VG: 100
General features
Hydrol®
L-HM/HLPhydraulic oils for hydrostatic systems are manufactured basing on high
quality mineral base oils and a set of enriching additives improving antiwear,
anticorrosive and antioxidative properties.
It provides:
-
extended lifetime,
-
reduces wear of hydraulic pump elements,
Application
Hydrol®
L-HM/HLP Phydraulic oils are intended mainly for heavy-duty power transferring
systems and for hydraulic driving and control systems i.e. hydraulic gears,
control mechanisms and other alike devices operating in hard conditions or in
increased temperature or humidity.
Standards, approvals,
specifications
Bosch
Rexroth RE 90220-01 - Hydrol® L-HM/HLP 32, 46, 68
MAG/
Cincinnati Machine P-68 -Hydrol® L-HM/HLP 32
MAG/
Cincinnati Machine P-70- Hydrol® L-HM/HLP 46
MAG/
Cincinnati Machine P-69 - Hydrol® L-HM/HLP 68
Denison
Hydraulics HF2/HF1/HF0- Hydrol® L-HM/HLP 32, 46, 68
ZETOR
(Proxima, Proxima Plus, Proxima Power, Forterra) - Hydrol® L-HM/HLP 32, 46
FAMUR
- Hydrol® L-HM/HLP 68
Bumech
- Hydrol® L-HM/HLP 46, 68
DIN
51524 part 2,
Oils
with viscosity grade of VG 32, 46 ,68, 100, 150 have been approved for
application in mining and are granted a certificate issued by the Central
Mining Institute allowing to mark the product with the security sign.
Physical and chemical properties
|
Parameters
|
Unit
|
Typical
values |
|
Kinematic
viscosity at 400C |
mm2/s |
95.8 |
|
Viscosity
index |
- |
93 |
|
Pour
point |
0C |
-25 |
|
Flash
point (open cup) |
0C |
245 |
|
Resistance
to foaming · susceptibility to foaming: foam
volume after 5 min. of blowing with air at 250C,
· foam durability: foam volume after 10 min. standing
still at 250C standing still at 250C |
ml |
20
0 |
|
Corrosion
action on copper plates (100oC/3h) |
degree
of corrosion |
1a |
|
Deemulsibility,
time to oil/water emulsion separation: - 40 - 43 ml
of oil - 37 - 40 ml of water
- 0 - 3 ml of emulsion at |
min. |
35 |
|
|
0C |
82 |
|
Ability
to release air at 50°C |
min. |
10 |
|
Ability
to transfer loads with the FZG, breaking load, minimum |
- |
10 |
ATTENTION:
Physicochemical parameters listed in the table are typical values.