Bentor 2
General characteristics
BENTOR 2 high-temperature grease is made from highly refined, high-viscosity mineral oil (oil viscosity at 40°C: approx. 220 mm²/s) and an aluminosilicate thickener hydrophobized with quaternary amines. BENTOR 2 is moisture-resistant and virtually inmeltable. It maintains a flexible consistency down to -10°C.
Application
BENTOR 2 is used for lubricating rolling and sliding bearings, as well as other friction units with a constant operating temperature from 120 o C to 200 o C.
Not recommended for lubricating low torque bearings or bearings with small radial clearance.
Standards, approvals, specifications
DIN 51 502: K2S-10
ISO 6743-9: ACEB-2
Physicochemical properties
Properties | One. | Typical values |
NLGI consistency class | - | 2 |
Penetration at 25 0 C, after mixing | mm/10 | 295 |
Mechanical stability: micropenetration after 4 hours of rolling at 60 0 C | % | 172 |
Structural stability: oil separation from grease, (m/m) | % | 8.0 |
ATTENTION: The above physical and chemical property values are typical. Actual values are provided in the quality certificates included with each batch of product. |