Мастило літієве Liten EP-1
LITEN® EP plastic greases are manufactured basing on refined mineral oil with the viscosity about 150 mm2 at temperature 40°C , lithium soaps of 12- hydroxylstearin acid and a set of additives increasing their lubricating, antioxidative and anticorrosive properties.
LITEN® EP plastic greases are intended to lubricate rolling bearings exposed to high loads and for less loaded bearings which, however, are exposed to impact loads.
Grease range of application: from -20°C to +120°C even in contact with water.
Limit working temperatures may however be higher or lower depending on the bearing type and required lubrication periods.
• LITEN EP-0 is intended to lubricate bearings of central lubricated devices working in low temperatures (- 20 to +120°C) and requiring forcing through of grease to long distances,
• Liten EP-1 is designed for lubrication of bearings of central lubricated devices working in moderate ambient temperatures and requiring forcing through of grease to long distances,
• Liten EP-2 is designed for lubrication of bearings of both central and individually lubricated devices working in high ambient temperatures and requiring forcing through of grease to short distances,
• Liten EP-3 is designed for lubrication of bearings of individually lubricated devices.
Standards, approvals, specifications
DIN 51 502: KP1G-20
ISO 6743-9: BCHB-1
Physical and chemical properties
|Worked penetration at 25°C||mm/10||332|
|Penetration at - 200C||mm/10||172|
|Structural stability oil separation from grease (m/m)||%||3,8|
|Base oil viscosity|
at temp. 40°C
|Note:Physicochemical parameters listed in the table are typical values.Real values are stated in quality control certificates attached to each product lot.|