Orlen Oil Ultor Progress 10W-40
|
| Quality class: | API: CK-4/CJ-4/CI-4/SN ACEA : E8, E11,E7, E6, E9 |
| Viscosity grade: | SAE: 10W-40 |
General features
Highest generation, synthetic oil UHPDO oil developed especially for European diesel engines and meeting the most strict
Euro V emission standards.
Main advantages:
- Compatible with filters and exhaust gas catalysts
- Stable operation in extreme temperatures
- Perfect engine protection against wear out and corrosion
- Very effective dispersion of black carbon.
- Extremely long interchange periods in very difficult operation conditions.
Application
ORLEN OIL Ultor Progress is recommended for diesel engines driven by low sulphur fuel (max. 50 ppm), equipped with exhaust gas recirculation, with or without diesel particulate filters and for engines with selective catalyst reducing nitric oxides in combustion gases. A unique “low SAPS” recipe guaranteeing low levels of sulphur, phosphorus and sulphated ash content - in compliance with ACEA E-6 makes the oil meet quality requirements and does not affect efficiency of filter and catalyst systems enabling operation of modern diesel engines meeting Euro V requirements. The oil may also be used in diesel engines of previous generations meeting requirements of Euro IV, III, II, I. It meets EPA Tier I and II standars in range of NOx and PM (particular matter). Suitable for use in vehicles with CNG engines.
Standards, approvals, specifications
DTFR 15C110 (228.51)
Volvo VDS-4.5
Renault RVI RLD-3
Mack EOS-4.5
MAN M3775,
This product meets Cummins Eng. Std. CES 20086
Meets requirements:
Volvo VDS-4.5
Renault RVI RLD-3
Mack EOS-4.5
MAN M3775,
This product meets Cummins Eng. Std. CES 20086
Meets requirements:
Mercedes-Benz 228.52
MAN M3477
MAN 3271-1,
DAF,
JASO DH-2,
Caterpillar ECF-3,
Deutz DQC TTCD,
Deutz DQC-IV-18 LA
This product meets Cummins Eng. Std. CES20076/77,
MTU Typ 3.1
MTU Typ 2.1
Physical and chemical properties
| Parameters | Units | Typical values |
| SAE viscosity grade | - | 10W-40 |
| kinematic viscosity at 100°C | mm2/s | 14.5 |
| viscosity index | - | 154 |
| flow temperature | °C | -30 |
| ignition temperature | °C | 240 |
| base value TBN | mg KOH/g | 10 |
| sulphate ash | % | 0.94 |
| Noack volatility | %(m/m) | 8 |
Note: Physicochemical parameters listed in the table are typical values. Real values are stated in quality control certificates attached to each product lot. |