Polish Centre for Testing and Certification has awarded to
ORLEN OIL the first European Ecolabel licence for lubricants in Poland.
The official distinction was introduced by the European Union in 1992
and identifies products with reduced level of environmental impact.
EU
Ecolabel provides information on company's specific approach to
environment and its protection, and confirms fulfilment of rigorous
requirements applicable throughout the European Union. Environment
protection and changing operational requirements for industrial machines
and equipment represent challenges for producers of oils and
lubricants. ORLEN OIL always strives to satisfy those expectations.
Therefore, a long-term cooperation of our experts with research and
development centres resulted in development of Hydrol BIO oils. The
oils, based on synthetic esters and natural triglycerides, can be
applied where environment protection remains an issue of vital
importance — in nature reserves, national parks, health resorts, and in
the vicinity of surface waters — said Marcin Gralewski, Chairman of the Board of ORLEN Oil.
The
distinction in environment protection awarded to ORLEN OIL by an
independent organisation provides the company with a competitive
advantage, and may stimulate interest of potential clients. Marking
HYDROL BIO HEES EL 46 and HYDROL BIO HETG 46 with a European label
constitutes a guarantee of quality of delivered products. It also
facilitates identification of products satisfying rigorous environmental
requirements. ORLEN OIL oils exhibit low toxicity, large biodegradation
potential, at the level of > 90% (m/m), as well as high content of
renewable raw materials, at the level of > 80% (m/m).
Last news
Show by period:
- All news
- Last month
- Last 3 months
- Last 6 months
- Last year
TURBINEX TG PREMIUM 32, manufactured by ORLEN Oil, has been
approved by ALSTOM, a world leader in energy, transmission grids and
transport.
ALSTOM turbine users require that the
lubricating oil in turbine's system has an official approval of the
manufacturer. This guarantees the reliability of the product and its
trouble-free use in the lubrication system of the turbine. Approvals,
being positive technical evaluation of products, not only acknowledge
their suitability for use but also certify their high quality. The
approval for ORLEN Oil product (ALSTOM HTGD 90117) has been granted
after almost one year long testing at the turbine's manufacturer during
which critical parameters stated in Alstom quality specifications for
turbine oils were checked. By obtaining the approval it is possible to
use the oil in modern gas turbines and gas-and-steam systems of CCGT
units.
PLATINUM ULTOR DRVINIG SCHOOL programme has been launched in cooperation with Volvo Trucks Driver Training. The programme comprises a cycle of trainings which are intended to increase road safety and raise the awareness in terms of economical use of vehicles. The first courses for selected ORLEN Oil clients took place on 25-27 May in Młochów, the headquarters of Volvo Group Trucks Poland.
The PLATINUM ULTOR DRIVING SCHOOL programme for professional drivers
includes theoretical training and practical exercises in safe and
economical driving. During the first part of the training, the
participants expand their theoretical knowledge concerning driving
technique, safety aspects and fuel economics as well as innovative
solutions used in Volvo trucks, which contribute to increased safety and
fuel savings.
The second part of the training involves driving a
unit comprising a Volvo FH 500 HP truck tractor and a loaded trailer
with a total weight of 39 tonnes. Each driver rides a 36-kilometre-long
course within a defined time limit. The rides are subject to evaluation –
the best fuel consumption result from the three days of training in a
given month qualifies the participant for the main competition in
December this year.
Orlen Oil, a leading manufacturer of oils and lubricants for automotive and industrial use, introduces its
offer
comprising 8 new oils from the PLATINUM Rider line: 6 for two-wheelers
equipped with four-stroke engines and 2 for two-wheelers with two-stroke
engines.
PLATINUM Rider line covers 8 products: 6 oils for four-stroke engines
and 2 oils for two-wheelers with two-stroke engines. 4T engine oils
fulfil the latest quality requirements, especially API and JASO in
various viscosity grades. The offer covers synthetic, semisynthetic and
mineral oils. The unique formula for four-stroke engine oils has been
developed based on the HTS – High Temperature Stability technology. An
objective and advantage of the highly advanced HTS formula is to ensure
effective lubrication of the engine, clutch and gear of every
two-wheeler, not just when driving on the road but also under extreme
operating conditions such as motorsport. HTS is a guarantee of maximum
use of engine power while reducing sediment and ensuring efficient heat
dissipation. PLATINUM Rider oils have endurance guarantee confirmed by
motorcycle "ORLEN TEAM”.
The unique HTS technology means:
- excellent piston cleanliness;
- enhanced thermo-oxidative stability of oil;
- enhanced shear stability under conditions of increased engine load in high
temperature; - extended engine life;
- excellent lubrication and protection of the clutch and gear;
- effective protection against excessive gear wear;
- increased engine power and acceleration.
ORLEN Oil, a manufacturer and distributor of lubricants enters the segment of the marine oil market. A new range of oils for inland waterway and maritime transport, including passenger ships, ferries, fishing boats and other vessels has been carefully developed to respond to the current challenges of the market.
A comprehensive product line includes 7 oils that meet the requirements of the most important manufacturers of marine engines, including MAN Augsburg, Pielestick, Wartsila, New Sulzer Diesel, and currently applicable environmental standards. The use of Monsun oils ensures that the engine of every vessel, regardless of its size and purpose, operates correctly and reliably, even in the toughest conditions.
The newly developed products of the Monsun line are interchangeable and mixable with oils of other brands, while maintaining the same parameters.
Hydrol Extra L - HV 46 стал лауреатом конкурса "Продукт года" в Польше,
организованного редакцией журнала "Engineering & Industrial".
Победителя
избирало не только экспертное жюри, но и сами клиенты, путем открытого
голосования на сайте конкурса. Каждый голос - это оценка за его
инновационность, пригодность к применению, легкость в использовании а
также потенциальные экономические и внеэкономические выгоды, связанные с
их приложением. Это наилучшая рекомендация на рынке.
Hydrol Extra L -
HV - это масло с высоким индексом вязкости и отличной стойкостью к
сдвигу. Тщательным образом разработанная формула предотвращает
образование кислот и шлама в результате окисления масла. Технология
продукции обеспечивает увеличенные интервалы замены масла, а также
снижает расходы на простои, ремонт и технические обслуживание.
The ORLEN OIL Research and Development Department has had its DELGAS L 40 oil entered into the list of oils accepted for use with MWM Gmbh (formerly known as DEUTZ) gas engines. MWM, a leading manufacturer of gas engines and energy systems, belongs to American CATERPILLAR Inc., a global leader in the production of industrial engines, construction machinery and power generators.
DELGAS L 40 is a high-quality, low-ash oil for stationary gas engines, developed based on refined base oils with a selection of enhancement additives. Its dispergation and cleaning additives control the accumulation of sludge and deposits to keep the engine clean at all times. Owing to its unique properties, it provides longer oil change intervals as well as reduced engine overhaul and maintenance costs.
The approval enables the use of DELGAS L 40 oil in MWM, DEUTZ, gas engines, for which the manufacturer recommends using oils with sulphated ash content of up to 0.5%, i.e. in the majority of engines propelled by natural gas and fairly uncontaminated gases.
Benefits of DELGAS L 40 oils:
• excellent thermal stability;
• resistance to oxidation and nitration;
• very good anti-wear properties;
• excellent protection against deposit formation;
• excellent anti-corrosion properties.
We congratulate partners and colleagues with the upcoming New Year and Merry Christmas!
October 22, 2014 was a Platinum Porsche test drive in Poznan, Poland ,. Our company joined to it.
https://www.youtube.com/watch?v=JkDX5BJQoIM
"Loko" joined to this action.
For getting free ticket please fill form at the SIA’s web-site: